And well, I'm going to start now publishing the ROMs available for our ThL W100.
The first is an Official ROM only for rev3 (check out what is yours!), so don't mess around your phone - it may get bricked and you'll get a useful phone (there is no solution).
ROM Version: ThL.W100.130912.JBV2.QHD.EN.COM.V01.8P32-kol
So, here it is how to install it properly (I'm not responsible for any damage on your phone. Read carefully before the installation!):
- First of all, download it. (Click here! / Mirror Link)
- What you are downloading is the Driver for ThL W100, SP Flash Tool (what will install the ROM on your phone) and the ROM itself. That's over 300MB!
- Install the driver (If your system is Windows 8, make sure you do this!)
- Open the SP Flash Tool
- Click in "Scatter-loading", then select the file "MT6589_Android_scatter_emmc.txt"
- UNCHECK THE FIRST "PRELOADER" (It's very important! If you don't do it, you will brick your phone and unable to use it again!)
- Remove the battery of your phone and wait a little bit
- Connect the USB Cable
- Click on "Download"
- Put the battery on your phone
- Wait until a green circle appears on your computer screen. When it appears, the process is finished.
- You're DONE!
The first is an Official ROM only for rev3 (check out what is yours!), so don't mess around your phone - it may get bricked and you'll get a useful phone (there is no solution).
ROM Version: ThL.W100.130912.JBV2.QHD.EN.COM.V01.8P32-kol
So, here it is how to install it properly (I'm not responsible for any damage on your phone. Read carefully before the installation!):
- First of all, download it. (Click here! / Mirror Link)
- What you are downloading is the Driver for ThL W100, SP Flash Tool (what will install the ROM on your phone) and the ROM itself. That's over 300MB!
- Install the driver (If your system is Windows 8, make sure you do this!)
- Open the SP Flash Tool
- Click in "Scatter-loading", then select the file "MT6589_Android_scatter_emmc.txt"
- UNCHECK THE FIRST "PRELOADER" (It's very important! If you don't do it, you will brick your phone and unable to use it again!)
- Remove the battery of your phone and wait a little bit
- Connect the USB Cable
- Click on "Download"
- Put the battery on your phone
- Wait until a green circle appears on your computer screen. When it appears, the process is finished.
- You're DONE!
hi! What's changes in this ROM?
ReplyDeletecan u post the link of miui rom for thl w100 rev3. or other roms that are compatible with thl w100 rev3. thanks in advance
ReplyDeleteHi,
ReplyDeleteit works fine, just dont forget to backup first (go into recovery mode volume up + power button for up to 10 secs, then navigate in recovery menu with volume down towards backup, press volume up which works as enter button and the backup process will start - sd card needed)
It is IMPORTANT to press volume up + power button, otherwise the download process won't start. Once done, unplug the USB, insert the battery and power up to see if it worked. If it did, switch the phone off and go to the recovery mode to recover your original apps from the backup file you have created before.