Official ROM ThL W100 - Only for rev3

And well, I'm going to start now publishing the ROMs available for our ThL W100.

The first is an Official ROM only for rev3 (check out what is yours!), so don't mess around your phone - it may get bricked and you'll get a useful phone (there is no solution).

ROM Version: ThL.W100.130912.JBV2.QHD.EN.COM.V01.8P32-kol

So, here it is how to install it properly (I'm not responsible for any damage on your phone. Read carefully before the installation!):

- First of all, download it. (Click here! / Mirror Link)
- What you are downloading is the Driver for ThL W100, SP Flash Tool (what will install the ROM on your phone) and the ROM itself. That's over 300MB!
- Install the driver (If your system is Windows 8, make sure you do this!)
- Open the SP Flash Tool
- Click in "Scatter-loading", then select the file "MT6589_Android_scatter_emmc.txt"
- UNCHECK THE FIRST "PRELOADER" (It's very important! If you don't do it, you will brick your phone and unable to use it again!)
- Remove the battery of your phone and wait a little bit
- Connect the USB Cable
- Click on "Download"
- Put the battery on your phone
- Wait until a green circle appears on your computer screen. When it appears, the process is finished.
- You're DONE!

ThL W100: which rev do I have?

Is there certain ROMs for each and different phone types. For ThL W100, is there rev 1, rev 2 and rev 3.

To know which rev do you have on your ThL W100 all you got to do is to remove the battery, and look for your Serial Number (S/N).

If it starts:
- with A: you have rev 1;
- with B: you have rev 2;
- with C: you have rev 3.

Hope it helps!